What am I doing wrong

Loams

Sealiner
ok, So I have a Shimano Crestfire 7 foot rod, with a Shimano (The model escapes me) 5000 (I think) koffiekatrol. The Reel is rated for line diameter of 0.30 to 0.35 line. I noticed the other day that my line is 0.37 or 0.38 (definately bigger than the rating, but not by much.

I have two problems with this reel.

Every now and then when I cast, I can hear something is not right, and when I look at my line I can see a small "kraaines" flying away from me. It's usually easy to unpick if I reel back, but this irritates me. Also it kinks my line, which as you all know is bad. What am I doing wrong?

Am I trying to cast too hard? Or is the Line diameter influencing it, and should I change my line to the specified diameter? Or could it be something else?

Secondly, I cast roughly 80 meters with this rod. I feel it's not far enough, shouldnt I get at least a 100 meters? I mostly use this rod for Tigerfish fishing, and casting distance is not the biggest issue, but I intend on playing with it in the surf at some stage and then I might want to get deeper.

Please guys, I would appreciate any advice.
 

Wayne

Sealiner
As LL has said you have to much line on the reel I had the same prob with mine sometime ago,I know how you feel,it iratated the living poop ( the little one wont let me swear ) out of me to.
 

MickJack

Senior Member
Loams

I think it sounds like you may have the wrong eyes on the rod. Does the rod have the large first eye specifically for coffee grinders?
 

Simen

Sealiner
Agree with the other guys too much line on the spool or when retreiving line not wound tight enough. On a koffie grinder you could easy change to a braided line which will give you the same if not higher breaking strain with a lower diameter. On coffee grinder definitely the thinner the dia the longer the cast.
 

Expat

Sealiner
[color=#006600]Loams[/color] wrote:
ok, So I have a Shimano Crestfire 7 foot rod, with a Shimano (The model escapes me) 5000 (I think) koffiekatrol. ..............


Secondly, I cast roughly 80 meters with this rod. I feel it's not far enough, shouldnt I get at least a 100 meters? ..............:shock:


Ek sou wat wou gee om 80m met n koffiemeul katrol en 7 voet stokkie te kan gooi!!!  Daai [/b]"kraaines" wat jy kry is maar een van die nadele van koffiemeul katrolle a.g.v. “line twist “. Soos die ander gesê het om dit te voorkom moet daar nie teveel lyn op die katrol wees nie en sorg dat die lyn altyd styf is met die inkatrol, veral die eerste twee draai van jou inkatrol.

Gaan kyk by die site http://www.bishfish.co.nz/articles/general/twist.htm[/b][/b]
 

Loams

Sealiner
Thanks for the input guys,

Firstly yes, the rod has a very large first eye, and it is entirely possible that I have too much line on the spool. My thinking was that the less of the spool that is exposed, the less the friction will be when I cast lol

Ok, maybe I should qualify my distance. It was measured with a sinker only, no baits and such. When I have the rod loaded with 2 hooks, baits and a sinker I only cast about 50 meters or so (Obviously no accurate way to measure when casting into a dam)

Ok, so I am going to do the following. I'll get some braid, and back my reel with the mono, then fill it with braid. Making sure I don't have too much on the reel.

Thanks for the article Expat. Perhaps I should put a swivel between my line and the bait rig? I also noted the other advice on the link you posted thanks!
 
Top