THE OFFICIAL ACE-CRAFT FAN PAGE

[Breads]

Cheers Bennie - we should have thought a bit more! Minor design change to get the control cables and topmounts in properly - the angle of the panel where the controls are to be fitted is too steep. Have had to cut a section out so the topmounts are level and not at an angle, so that the cables can go straight down, so a bit of re-work. Will post more pics as we go along.

 

[benniejordaan]

Breads wrote:

Cheers Bennie - we should have thought a bit more! Minor design change to get the control cables and topmounts in properly - the angle of the panel where the controls are to be fitted is too steep. Have had to cut a section out so the topmounts are level and not at an angle, so that the cables can go straight down, so a bit of re-work. Will post more pics as we go along.

I'm sure it will still look cool, every job has it's glitches! Keep us posted, I look forward to it.

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[BFC]

Here is a nice project I have encountered for the winter !

16,6ft AceCraft

 

[thika]

Howzit Whitewash,

Here's the test as promised

 

How's everyone else been keeping?

I have been sleg on this forum...priorities priorities!

 

Remember Ace Crafts don't skrik the NW! 

 

Any new pics/stories?

 

[thika]

Tried again...dof today?

Will make another plan later

First Tas and dunes to gain insight on how to post the scans 

 

[BFC]

I am New to this forum , I am restoring a 16.6ft AceCraft Seaglyder during the winter ,would like to post some pics but for some reason they dont take when I post them!!!

What to do?? cant find the PRITT function !

 

[Whitewash]

BFC wrote:

I am New to this forum , I am restoring a 16.6ft AceCraft Seaglyder during the winter ,would like to post some pics but for some reason they dont take when I post them!!!

What to do?? cant find the PRITT function !

Here is two comprehensive tutorials for adding pictures to your posts. If you follow these steps, you'll have no problems

http://www.sealine.co.za/view_topic.php?id=10684&forum_id=17

http://www.sealine.co.za/view_topic.php?id=4186&forum_id=17

 

[BFC]

Found 2 good 55hp Yamaha 2cyl outboards for the project .

They have 300 hrs on them and only been used on a Baronet on the Vaal dam.

 

[BFC]

Boat has arrived at the Redelinghuys operating theatre(Potato Shed)
in the Sandveld where the refurbishing of this old legend will start.

The Mission is to make something standout from the norm on a ''shoe string'' budget not compromizing functionality and dependibility. This boat will be used in Mozambique 2-3times per year so dont need a R300k investment standing idle. So far Capital outlay has been R10k for hull on trailer and R15k for 2 motors.- Now the fun starts getting all sorted under the R40k capital budget.

 

[thika]

Howzit BFC,

That's close to me

Let me know when you will be up here next

 

Regards

Thika

 

[BFC]

Currently in Strand there is a guy selling boats , 3 of them are Ace Craft's

1) 19ft Seaglider (Dual console)
2) 16,6ft wooden kit
3) 15.6ft with 2x60hp yamaha's

Anybody interessted in a project??

 

[Zambuca]

hi can ne 1 tell wats the difference on the viking 18.6 hull and an ace hull.this ia my boat im working finally on the deck

 

[foghaul]

Julias malema rides an ace craft

 

[thika]

You know foghaul about Acecrafts~! 

 

[thika]

You know foghaul about Acecrafts!



Will send tutorial about drowned and shot!