Joining Braids

dewalds

Member
Hi guys:::S

I have 600m of 50lb Braid on my Torium 50, and would like to ad 300-600m extra. From what I have read on the forum its not generally a good idea to join Braids, however, I see some guys stiched they're braids together? I have tried stitching braid before and failed misserably....

Thinking that Topshot is connected to braid with a bimini and catspaw, I have something similar in mind. Would it work if I join say 5m of topshot via biminis and a cats paw to the bottom section of braid and then join the new topsecton of braid on the same way to the 5m section of nylon? Basically using the nylon as a conection between the braids?

Any help and imput would be appreciated!^^..
 

morbus

Senior Member
Stitch the braid into dacron-so you have a dacron joint
For peace of mind, I would need a very thick piece of nylon to ensure I dont lose the top half of braid and that wouldnt be so nice to have on the spool
Dacron is much thinner at high poundage and easy to stitch
 

subaruseun

Sealiner
may i ask why you need 0.9-1.2km of 50lbs?

what topshot do u intend using?

bimini braid connections will break at about 65-70% of rated breaking strain.

stitched connections have proven to be best.
 

200ts

Senior Member
I use the bob sands knot to tie my braid mainline to my braid leader and its a strong knot.
 

dewalds

Member
Hi guys, thanks for the replies.

@Subaroseun, I fish mostly in kzn, and lately, if the conditions allows it we paddle baits out, like a shad head etc. With the bait paddled out 300-400m the amount of line left on the reel to fight a fish is substantially less. So in short, I'm currently left with about 600m of line left to fight the fish. I have seen the wrong end of the spool as well after dropping a bait with a kite during july.

In short, I just want to be able to turn the fish. The reason for not going with thicker/stronger braid is that (generally speaking) the 50lb have done its job good, and going with a thicker line would result in less line to turn a fish that allready has a 400m advantage.

Currently I'm using 0.55 or 0.58mm topshot.
 

Enigma

Moderator
Stitching is the strongest and you should do at least 30 stitches from either side.

Bimini in 50lbs Whiplash tests at a consistant 30lbs average whereas a stitched loop tests at 56lbs

You could stitch the loops into both ends and then stitch the loops into one another to really make sure but personally believe that's overkill

Put 700m 75lbs HMP on with 200m of 0.65mm topshot and fish heavy high drag from the word go.
 
Hi Enigma,
any chance we will get to see a diagram of how to stitch 2 braids together?? I also need to stitch 2 braids of more or less the same lbs rating and diameter.
 

Enigma

Moderator
Sealine's been havin it all de time

http://www.sealine.co.za/view_topic.php?id=47853&forum_id=44

http://www.sealine.co.za/view_topic.php?id=22605&forum_id=44

http://www.sealine.co.za/view_topic.php?id=47856&forum_id=44
 

dewalds

Member
Thanks for all the feedback guys, I guess I'll have to get the stitching method mastered, or simply get thicker braid and hope for the best!
 
Top