Hi Guys and Happy New Year! Lets start off the

Carll

Senior Member
Like Vades said here,the Shimano Sustain 5000 is a Spinning machine ! I paid R2200

for mine about 2 months ago. The Shimano Stradic 5000 goes for about R1700.

A  friend of mine paired the Shimano Saragosa 5000 with his Assassin Amia (11ft) and

its very well balanced. He paid R1400 for the reel. I have the Shimano Saragosa 6000

on my heavier Spinning setup and can say thats a BULL of a reel !
 

Gustav Kamfer

New member
cool jah. vades thanks, the thing about buy through the post is that I want to see and feel the reel first and maybe even fit it onto the rod before committing. especially when its a reel of 2k.
I suppose its better to buy quality the first time rather than end up buying 2 reels.
carll, I think 5000 is defintily the way to go, because like l say the 6000 is a bit overpowering. I will go have a look this weekend, Go shop around a little.
how about reels like the daiwa Seagate or penn conflict or torque, im not sure about the prices on them.
it doesnt seem like they are very popular since one doesnt often hear of guys using them?
 

Jakes101

New member
Gustav Kamfer wrote:
cool jah. vades thanks, the thing about buy through the post is that I want to see and feel the reel first and maybe even fit it onto the rod before committing. especially when its a reel of 2k.
I suppose its better to buy quality the first time rather than end up buying 2 reels.
carll, I think 5000 is defintily the way to go, because like l say the 6000 is a bit overpowering. I will go have a look this weekend, Go shop around a little.
how about reels like the daiwa Seagate or penn conflict or torque, im not sure about the prices on them.
it doesnt seem like they are very popular since one doesnt often hear of guys using them?

I would personally go for a Shimano. I had a Daiwa Seagate and had it replaced 3 times. It started sticking/seizing after long spinning sessions. Eventually replaced it with my Shimano Stradic and have never looked back.

Can't comment on the Penn reels as I've never used them before.
 
Jakes101 wrote:
Gustav Kamfer wrote:
cool jah. vades thanks, the thing about buy through the post is that I want to see and feel the reel first and maybe even fit it onto the rod before committing. especially when its a reel of 2k.
I suppose its better to buy quality the first time rather than end up buying 2 reels.
carll, I think 5000 is defintily the way to go, because like l say the 6000 is a bit overpowering. I will go have a look this weekend, Go shop around a little.
how about reels like the daiwa Seagate or penn conflict or torque, im not sure about the prices on them.
it doesnt seem like they are very popular since one doesnt often hear of guys using them?

I would personally go for a Shimano. I had a Daiwa Seagate and had it replaced 3 times. It started sticking/seizing after long spinning sessions. Eventually replaced it with my Shimano Stradic and have never looked back.

Can't comment on the Penn reels as I've never used them before.

Vades i have also had the same problems with my Daiwa Seagate. i have replaced it with a Shimano Sustain 5000 and will never fish with another reel other than a Shimano Stradic/Sustain ever again!
 

Vades

Sealiner
clinton stanford wrote:
Jakes101 wrote:
Gustav Kamfer wrote:
cool jah. vades thanks, the thing about buy through the post is that I want to see and feel the reel first and maybe even fit it onto the rod before committing. especially when its a reel of 2k.
I suppose its better to buy quality the first time rather than end up buying 2 reels.
carll, I think 5000 is defintily the way to go, because like l say the 6000 is a bit overpowering. I will go have a look this weekend, Go shop around a little.
how about reels like the daiwa Seagate or penn conflict or torque, im not sure about the prices on them.
it doesnt seem like they are very popular since one doesnt often hear of guys using them?

I would personally go for a Shimano. I had a Daiwa Seagate and had it replaced 3 times. It started sticking/seizing after long spinning sessions. Eventually replaced it with my Shimano Stradic and have never looked back.

Can't comment on the Penn reels as I've never used them before.

Vades i have also had the same problems with my Daiwa Seagate. i have replaced it with a Shimano Sustain 5000 and will never fish with another reel other than a Shimano Stradic/Sustain ever again!

My Shimmy gets dunked in salt water every week and continues to operate flawlessly.
 

Gustav Kamfer

New member
X-Ship
New "Magnumlite CI4 Rotor" (1000-4000)
Aluminum Sideplate
Rapid Fire Drag
New "Reel Stand" on 1000-5000 only
Paladin Gear Durability Enhancement
Propulsion Line Management System: Propulsion
Spool Lip, SR One-Piece Bail Wire, Power Roller III.
Redesigned Bail Trip, S-Arm Cam
Aero Wrap II Oscillation
SR-Concept: SR 3D Gear, SR One-Piece Bail Wire
S A-RB (Shielded A-RB) Ball Bearings
Aluminum Spool
S-Concept: S Rotor, S Guard, S Arm cam
New Machined Aluminum Handle
Direct Drive Mechanism (Thread in Handle
Attachment)
EVA Handle Knob
WP Drag (Waterproof Drag)
Maintenance Port
Fluidrive II
Floating Shaft
Dyna-Balance
Super Stopper II
Repairable Clicker
Approved for use in Saltwater

thanks for the input okes. I was thinking about going with a Penn of
some sorts, since im quite happy with the sargus even though its Not a top top of the range it is good and solid for tje price you pay.
but now after speaking to the pro's, I think ill rather take yoir advice and get something worthwhile.

so the specifications on the side of the box is qute extensice.
does anyone know that "X-ship" is or refers to?
some of the okes said that it makes the reel better than the older mods so presume its a recent upgrade.
 

Attachments

  • Sustain_FE.image.-familyImage-Single-image.dash.jpeg
    Sustain_FE.image.-familyImage-Single-image.dash.jpeg
    22.7 KB · Views: 1,044

Vades

Sealiner
From the Shimano website: "X-Ship provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This means the gears will stay in the same position under the heaviest loads. The added benefit is that friction between the spool shaft and gear are eliminated. This will enhance the casting performance of the reel with lighter lures, and allow for longer casts."
 

like-to-fish

New member
So still looking to catch my first cob on lure from the surf I decide to go fish vanstadens the weekend. I pop in at alcocks on thursday lunch time to pick up some paddle tails to give a go over the weekend. I arrive there saterday morning and take about a 5km walk down towards gamtoos side. Find a nice hole put on my newly acquired 5 inch orca paddle tail and as luck would have it first cast and after just a few turns of the reel VAS.!! I fight the fish for a few minutes and the end result my first cob on lure from the surf. Fish measured 101cm and also a PB cob on lure. I could not manage another fish over the weekend but was very happy with my cob. Fish was safely released to fight again another day. Thanks for all the advice of my fellow sealiners that helped me to gain sufficient knowledge to catch my first cob from the surf
 

like-to-fish

New member
So still looking to catch my first cob on lure from the surf I decide to go fish vanstadens the weekend. I pop in at alcocks on thursday lunch time to pick up some paddle tails to give a go over the weekend. I arrive there saterday morning and take about a 5km walk down towards gamtoos side. Find a nice hole put on my newly acquired 5 inch orca paddle tail and as luck would have it first cast and after just a few turns of the reel VAS.!! I fight the fish for a few minutes and the end result my first cob on lure from the surf. Fish measured 101cm and also a PB cob on lure. I could not manage another fish over the weekend but was very happy with my cob. Fish was safely released to fight again another day. Thanks for all the advice of my fellow sealiners that helped me to gain sufficient knowledge to catch my first cob from the surf
 

like-to-fish

New member
Finally got my first cob on lure from the surf this saterday at vanstadens. Bait used was a 5inch orca paddle tail. The fish measured 101cm and was safely released. Thanks for all the advice of my fellow sealiners which helped me gain the necessary knowledge to find my first cob from the surf.
 

like-to-fish

New member
Finally got my first cob on lure from the surf this saterday at vanstadens. Bait used was a 5inch orca paddle tail. The fish measured 101cm and was safely released. Thanks for all the advice of my fellow sealiners which helped me gain the necessary knowledge to find my first cob from the surf.
 

like-to-fish

New member
Sorry for the double posts. Thought it did not post the first time so resubmitted it. Im struggling to post the pic but will try again now.
 

Gustav Kamfer

New member
Rite so after quite a bit of thought and shopping around, going from one tackle shop to the other, I finally decided on the shimano sustain 6000FG.

Initially I wanted a 5000 size reel for my exceler elite 11' 6'' since the penn sargus I own is a bit heavy and bulky for the rod, but after having a proper look ate the sustain 6000 and after comparing it to the sargus 6000 my mind changed once again.

The sustain is about 100g lighter than the sargus and has a slightly smaller profile. When holding the reels in hand it is not much, but after placing them of the rod the difference is clear.

I now still need to fill her up. I was thinking in the line of 20lb gator braid of power pro, or perhaps 15lb fire line. Thin braid topped of with 5m of 50lb braid leader and 1-1.5m of 0.5.-0.7mm fluoro.

This is definitely an upsized setup (from my 8ft vengeance and exceler 3000) but hopefully it will give me that extra distance I need to get that extra arm stretches this summer!

[glow=red]By The Way:[/glow] What do you okes think of braid leaders? It should spare the thinner braid when casting (if using a short mono leader) and reduce friction through the guides when casting ( if using a long leader).
 

Attachments

  • sustain.png
    sustain.png
    441.3 KB · Views: 889

Mongvis

New member
Fantastic fish, how about helping the nocices out, how do you retrive with surf running? Bottom running paddle tails, what weight. Do you use spoons. I live in cannon rocks the surf is fierce. Looks like your areas are awesome. Regards, Mongvis
 

Jakes101

New member
like-to-fish wrote:
Sorry for the double posts. Thought it did not post the first time so resubmitted it. Im struggling to post the pic but will try again now.

Posting pic on behalf of like-to-fish.

Well done on an awesome catch bud and respect for releasing it as well.
 

Attachments

  • 20131109_110249.jpg
    20131109_110249.jpg
    29.7 KB · Views: 730
Top