View single post by cjcooper
 Posted: Mon Jul 31st, 2017 01:02 pm
PM Quote Reply Full Topic
cjcooper



Joined: Mon Apr 27th, 2015
Location: Middelburg, South Africa
Posts: 74
Status: 
Offline
Mana: 
Material:

Marine ply 15x2400x1200
Marine ply 9x2400x1200
Resin - 15l minimum. Epoxy recommended.
Fiber mat. I started with 3kg. will probebly need more. The woven type is recommended. although ive spoken to guys using chop strand only and reinforcing as required.
Water proof sealer. I prefer sikaflex as it bond to most materials incl pvc.
Acetone
Flow coat.
Gel coat.
Sanding paper.
25x75mm wood for the clamping process.
card board or hardboard for your template.
masking tape.
brass self tapping screws. 4x30mm
threader rod 8/10mm plus nuts and large washers.


Tools required:

Drill - drill bits, rippers, hole saws- various sizes.
115mm grinder , cutting disks, flapper disks various grids.
jigsaw.
sander.
hammer.
crowbar.
wood chissel. 15mm working well for me.
screwdrivers.
G-clamps the more the better.
measuring tools and rulers.
scissors.
mixing cups and stirrers... a lot
drill mixing tool. can be made but found one at builders for R80.
trowel -rounded tip.
Stanley knife.
putty knife.
General tool set.
Lifting apparatus for engines.
storing bench for engines, built one from scrap metal.

Ill ad more as i remember/require them.

Attachment: IMG_20170526_163335.jpg (Downloaded 358 times)